TYH Ultraviolet Flame Detector

TYH Ultraviolet Flame Detector

Main Parts: This detection device is built from an integrated TYH ultraviolet flame unit

Where could it be used Well, this detector is designed to pick up light signals, not needing to make contact with flames. You see what’s happening with the flame in real-time right on the display. In practice, people have used it for flame monitoring on different industrial burners, in furnaces, and flare lines

	TYH Ultraviolet Flame Detector (Boiler Version) - Runs on DC24V - Sends outputs via relay contacts, 2A/220V, plus an analog 4–20mA signal - Picks up a lighter’s ultraviolet flame at a distance of 4 metres - Microcontroller deals with signals inside, adjustable by pressing buttons. You get both real-time data on the digital display and external outputs - Installs with a threaded connection, making it straightforward when hooking up to common couplings, valves, or cooling air pipes - Explosion protection: EXdⅡCT6 Gb
	TYH Ultraviolet Flame Detector (Flare Version) - Powered by DC24V - Includes both relay contacts at 2A/220V and a 4–20mA analog output - Detects ultraviolet signals from a lighter flame up to about 4 metres - Microcontroller does the internal processing, which can be adjusted using buttons. Real-time numbers appear on a digital screen while external outputs are provided - Attached via a flat mounting bracket - Explosion protection: EXdⅡCT6 Gb
	Ultraviolet UV Tube - Components used are imported. Wavelength range comes in at 185 to 260nm and is not affected by sunlight - Works between -20°C and 60°C - Expected to last for a total of 25,000 hours

Some content is reposted from the internet. Copyright belongs to the original authors. If infringement occurs, please contact us for removal. Content involving franchising or investment carries risks - exercise caution when making decisions.